SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview - Page 92 - maemo.org

claustn | # 911 | 2019-11-21, 18:45 | Report

I have the correct version of multirom, I am uploading it to dropbox right now.
I will also free up some space and try this new version!

Here it is: https://www.dropbox.com/s/ku7hnt5n2r...50630.zip?dl=0

Last edited by claustn; 2019-11-21 at 19:06.

The Following 3 Users Say Thank You to claustn For This Useful Post:
edp17, mautz, nickh

edp17 | # 912 | 2019-11-21, 20:08 | Report

I have downloaded the 2.8.7 from here.

The Following User Says Thank You to edp17 For This Useful Post:
nickh

mautz | # 913 | 2019-11-21, 20:11 | Report

You also find the right files in the first post of the Nexus5 cm13 thread.

The Following 2 Users Say Thank You to mautz For This Useful Post:
edp17, nickh

edp17 | # 914 | 2019-11-21, 20:39 | Report

@mautz
I am about to generate a new image with some changes. Can you take a look my question here, please? Thanks.

Edit: The mer-kernel-check says to unset CONFIG_BT_MSM_SLEEP. In my kernel that was y. Now I set it to n. Maybe this is why the bluetooth doesn't work?

Edit2: I also set CONFIG_TMPFS_XATTR as strongly recommended.

Edit3: and all of these:
CONFIG_CGROUPS
CONFIG_CGROUP_FREEZER
CONFIG_CGROUP_DEVICE
CONFIG_CGROUP_CPUACCT
CONFIG_CGROUP_MEM_RES_CTLR
CONFIG_CGROUP_MEM_RES_CTLR_SWAP
CONFIG_CGROUP_MEM_RES_CTLR_KMEM

Edit4: I think the unset CONFIG_BT_HCISMD is the reason why the bluetooth doesn't work. I go through the hadk-faq to try make it work.

Last edited by edp17; 2019-11-21 at 21:08.

The Following User Says Thank You to edp17 For This Useful Post:
mautz

mautz | # 915 | 2019-11-21, 21:20 | Report

I've got all the options except CONFIG_DEVTMPFS_MOUNT and CONFIG_CGROUP_MEM_RES_CTLR_SWAP enabled in my CM13 version.

CONFIG_BT_MSM_SLEEP is needed to enable sleep mode for Bluetooth, without this minimecs script can not work. This is not the problem fo the non working bluetooth.

I've never got HCISMD wy working like it's in the HADK, need to do it with hciattach. But give it a try, maybe you can get it to work

The Following User Says Thank You to mautz For This Useful Post:
edp17

edp17 | # 916 | 2019-11-21, 21:31 | Report

Originally Posted by mautz View Post

I've got all the options except CONFIG_DEVTMPFS_MOUNT and CONFIG_CGROUP_MEM_RES_CTLR_SWAP enabled in my CM13 version.

CONFIG_BT_MSM_SLEEP is needed to enable sleep mode for Bluetooth, without this minimecs script can not work. This is not the problem fo the non working bluetooth.

I've never got HCISMD wy working like it's in the HADK, need to do it with hciattach. But give it a try, maybe you can get it to work

Thank you!

I have found the reason why the camera stopped working.

I'll fix in the next image. (Hopefully.)

You are probably right about the CONFIG_BT_MSM_SLEEP. I set it to y in my kernel too. This cannot be the reason why the bluetooth doesn't work.

Last edited by edp17; 2019-11-21 at 21:48.

The Following User Says Thank You to edp17 For This Useful Post:
mautz

edp17 | # 917 | 2019-11-21, 23:04 | Report

Well, it seems if I try to automatically distribute a file into the /home/nemo, the permission is not correctly set for /home/nemo folder. (Now I got the same loop problem but the owner of the /home in sparse/ is not root but the user on the PC.
I thought when the builder puts this into the package it would change the permissions properly.

The issues with this new image (0.13) are some kind of combination of the previous ones.
Examples:
- It has the initial setup loop. (wrong permission on /home/nemo)
- However I included the configs into /etc/gst-droid, the camera doesn't work.

- However I followed the hadk-faq, the bluetooth doesn't work either.

- Plus the torch is not turning on.

Maybe I need to repeat the gstreamer and camera sections in the hadk?

edp17 | # 918 | 2019-11-21, 23:23 | Report

Originally Posted by mautz View Post

I've got all the options except CONFIG_DEVTMPFS_MOUNT and CONFIG_CGROUP_MEM_RES_CTLR_SWAP enabled in my CM13 version.

CONFIG_BT_MSM_SLEEP is needed to enable sleep mode for Bluetooth, without this minimecs script can not work. This is not the problem fo the non working bluetooth.

I've never got HCISMD wy working like it's in the HADK, need to do it with hciattach. But give it a try, maybe you can get it to work

Currently I have both, the solution from the hadk and the hciattach version form you. Should I use only one of them? Thanks.

mautz | # 919 | 2019-11-21, 23:27 | Report

Could you upload the image?

Last edited by mautz; 2019-11-21 at 23:34.

edp17 | # 920 | 2019-11-21, 23:33 | Report

Originally Posted by mautz View Post

Could you upload the image?

I have done. Here