Run AlienDalvik on Nexus 4 - Page 8 - maemo.org

karan5chaos | # 71 | 2017-02-08, 13:13 | Report

Originally Posted by nieldk View Post

libplayback_adreno.so is not exisiting (and probably not needed since CM12)

The two other libs are in
lib/libmemalloc.so
lib/libqdutils.so

However, the full path if you want to 'see' them on the filesystem is

/system/lib/libmemalloc.so
/system/lib/libqdutils.so

It is relative paths in the script, starting by /system folder

hello. did u get dalvik to run ?

nieldk | # 72 | 2017-02-08, 13:32 | Report

Originally Posted by karan5chaos View Post

hello. did u get dalvik to run ?

Nope, and now I need a reinstall of system *sigh*

karan5chaos | # 73 | 2017-02-08, 13:36 | Report

Originally Posted by nieldk View Post

Nope, and now I need a reinstall of system *sigh*

same here..
every commands is successful but it still won't start dalvik...
hope someone figures out the problem

cvp | # 74 | 2017-02-08, 14:46 | Report

Originally Posted by nieldk View Post

Nope, and now I need a reinstall of system *sigh*

reinstall system? what do you try?

matemana | # 75 | 2017-02-08, 18:15 | Report

Originally Posted by karan5chaos View Post

i just modified the sh file

oh and btw i get an error when i run chmod-x command
it says no directory

Here is aliendalvik. No need for sh script nor you have to create that vendor/lib/egl/egl.cfg. Screen density problem is fixed N4 has 720p 320 ppi and N5 & OPX 1080p i set Density to 480 in build.prop (yes i know that N5 has 445.03 ppi

but 480 is default in android too)

I made this based on nieldks post about modified sh script for OPX. I do not have that device so i do not know if this will work, but i can confirm that what i changed does work on nexus 5 though. So if that sh script is correct for OPX this rpm should just work.

http://bin.ge/dl/247945/aliendalvik-...mv7hl.rpm.html

Last edited by matemana; 2017-02-08 at 18:23.

The Following User Says Thank You to matemana For This Useful Post:
Koiruus

cvp | # 76 | 2017-02-08, 18:38 | Report

Originally Posted by matemana View Post

Here is aliendalvik. No need for sh script nor you have to create that vendor/lib/egl/egl.cfg. Screen density problem is fixed N4 has 720p 320 ppi and N5 & OPX 1080p i set Density to 480 in build.prop (yes i know that N5 has 445.03 ppi

but 480 is default in android too)

I made this based on nieldks post about modified sh script for OPX. I do not have that device so i do not know if this will work, but i can confirm that what i changed does work on nexus 5 though. So if that sh script is correct for OPX this rpm should just work.

http://bin.ge/dl/247945/aliendalvik-...mv7hl.rpm.html

thanks for the work, but its not working

matemana | # 77 | 2017-02-08, 19:25 | Report

Originally Posted by claustn View Post

There is a beautiful website called archive.org where I found it! http://web.archive.org/web/201604120...hammerhead.zip

Please try it and let me know if it works

I tried it with that CM11 but i had to install SFOS 1.1.9.28 then with little modification to sh script for aliendalvik now it runs on CM12.1 BASE too on Nexus 5. Though i could not install Play services and play store, but apks are working and fdroid is working too.

cvp | # 78 | 2017-02-08, 20:58 | Report

@matemana, can you upload the missing file in oneplus x from nexus cm12.1 ?

The Following User Says Thank You to cvp For This Useful Post:
taixzo

claustn | # 79 | 2017-02-08, 22:33 | Report

Originally Posted by matemana View Post

I tried it with that CM11 but i had to install SFOS 1.1.9.28 then with little modification to sh script for aliendalvik now it runs on CM12.1 BASE too on Nexus 5. Though i could not install Play services and play store, but apks are working and fdroid is working too.

To run it on Nexus 5 do I have just to install the file you built? But it might not work with Sailfish 2.0.1.1 right?

karan5chaos | # 80 | 2017-02-09, 03:25 | Report

Originally Posted by matemana View Post

Here is aliendalvik. No need for sh script nor you have to create that vendor/lib/egl/egl.cfg. Screen density problem is fixed N4 has 720p 320 ppi and N5 & OPX 1080p i set Density to 480 in build.prop (yes i know that N5 has 445.03 ppi

but 480 is default in android too)

I made this based on nieldks post about modified sh script for OPX. I do not have that device so i do not know if this will work, but i can confirm that what i changed does work on nexus 5 though. So if that sh script is correct for OPX this rpm should just work.

http://bin.ge/dl/247945/aliendalvik-...mv7hl.rpm.html

the problem is that i was able to complete all the mentioned step successfulyy but the aliendalvik still faild to start.

EDIT :

i get this error while installing the RPM -

Code:

Loading repository data...
Reading installed packages...
Resolving package dependencies...

Problem: nothing provides /system/bin/sh needed by aliendalvik_OPX-1.0.46-1.armv7hl
 Solution 1: do not install aliendalvik_OPX-1.0.46-1.armv7hl
 Solution 2: break aliendalvik_OPX-1.0.46-1.armv7hl by ignoring some of its dependencies

i did "devel-su ls system/bin" and i can see sh being present there :/

Last edited by karan5chaos; 2017-02-09 at 03:58.