Active Topics
-
Is there a section to talk about Java ME? Apps, etc. (0)
to General by Kalatti - 3 days, 7 hrs ago -
Extra softwares in Sailfish using CLI, repositories, etc (117)
to SailfishOS by nieldk - 5 days, 4 hrs ago -
Firefox with Leste (6)
to Maemo 7 / Leste by teroyk - 6 days, 1 hr ago - more...
| The Following 2 Users Say Thank You to dattelfisch For This Useful Post: | ||
 |
|
2019-06-06
, 09:36
|
|
Posts: 862 |
Thanked: 2,511 times |
Joined on Feb 2012
@ Germany
|
#2
|
Have you tried to disable the watchdog with the flasher?
Don't know if all flags from N900 flasher are the same for N9/N950.
This could prevent a boot loop:
These could be also interesting:
no-omap-wd
no-ext-wd
http://wiki.maemo.org/R%2526D_mode
Don't know if all flags from N900 flasher are the same for N9/N950.
This could prevent a boot loop:
Code:
--set-rd-flag=no-lifegard-reset
no-omap-wd
no-ext-wd
http://wiki.maemo.org/R%2526D_mode
__________________
N900: gpxsee, fahrplan, gpscon, genwall, qrcode, hextool, libjansson4, libevent-2.0-5, cnee, psi-plus, mihphoto, shc
Maemo flasher/rescue live image.
Fremantle Harmattan SDK VM
N900: gpxsee, fahrplan, gpscon, genwall, qrcode, hextool, libjansson4, libevent-2.0-5, cnee, psi-plus, mihphoto, shc
Maemo flasher/rescue live image.
Fremantle Harmattan SDK VM
| The Following 4 Users Say Thank You to Halftux For This Useful Post: | ||
|
|
2019-06-06
, 12:14
|
|
Posts: 803 |
Thanked: 1,585 times |
Joined on Aug 2014
|
#3
|
Originally Posted by dattelfisch
That statement worried me as just flashing once with "DFL_61_HARMATTAN_40.2012.21-3_PR_RM680" was quite enough as that firmware was hard enough to source.
Unfortunetely my N950 doesn't boot up. I tried reflashing with every available firmware.
With regards to trying R&D mode, enable with:
HTML Code:
--enable-rd-mode --set-rd-flags=no-lifeguard-reset
HTML Code:
--disable-rd-mode
Last edited by aspergerguy; 2019-06-06 at 12:23. Reason: Addition
| The Following 5 Users Say Thank You to aspergerguy For This Useful Post: | ||
 |
|
2019-06-06
, 13:18
|
|
Posts: 4,117 |
Thanked: 8,901 times |
Joined on Aug 2010
@ Ruhrgebiet, Germany
|
#4
|
State of battery?
flasher -i
should show you / and probably charge also, but maybe you need to give full flash command (kernel is enough) to charge, there is a dedicated thread here on tmo.
Do you have also the eMMC image? Then at least worth atry is full flash eMMC and firmware wiping all.
flasher -i
should show you / and probably charge also, but maybe you need to give full flash command (kernel is enough) to charge, there is a dedicated thread here on tmo.
Do you have also the eMMC image? Then at least worth atry is full flash eMMC and firmware wiping all.
__________________
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!
Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257
editsignature, http://talk.maemo.org/profile.php?do=editsignature
SIM-Switcher, automated SIM switching with a Double (Dual) SIM adapter
--
Thank you all for voting me into the Community Council 2014-2016!
Please consider your membership / supporting Maemo e.V. and help to spread this by following/copying this link to your TMO signature:
[MC eV] Maemo Community eV membership application, http://talk.maemo.org/showthread.php?t=94257
editsignature, http://talk.maemo.org/profile.php?do=editsignature
| The Following 3 Users Say Thank You to peterleinchen For This Useful Post: | ||
|
|
2019-06-06
, 15:57
|
|
Posts: 13 |
Thanked: 18 times |
Joined on Jun 2019
|
#5
|
Originally Posted by Halftux
Unfortunetely, the flags didn't solve the problem. I concatenated them, too, like:
Have you tried to disable the watchdog with the flasher?
Don't know if all flags from N900 flasher are the same for N9/N950.
This could prevent a boot loop:
These could be also interesting:Code:--set-rd-flag=no-lifegard-reset
no-omap-wd
no-ext-wd
http://wiki.maemo.org/R%2526D_mode
Code:
flasher -F img.bin --set-rd-flag=no-lifeguard-reset,no-omap-wd,no-ext-wd
Originally Posted by aspergerguy
The first command changed nothing but the second one let's it vibrate again and the notification-LED is fading instead of switching from on to off. But then the phone powers off. That's a little success I think.
That statement worried me as just flashing once with "DFL_61_HARMATTAN_40.2012.21-3_PR_RM680" was quite enough as that firmware was hard enough to source.
With regards to trying R&D mode, enable with:
and disable with:HTML Code:--enable-rd-mode --set-rd-flags=no-lifeguard-reset
In what state of charge is BL-4D battery as at least can be charged outside device if necessary rather than using flasher?HTML Code:--disable-rd-mode
Originally Posted by peterleinchen
Yes, I'm using the eMMC image from "Win_OCF_02-6_RM680-RM680-OEM1.exe".
State of battery?
flasher -i
should show you / and probably charge also, but maybe you need to give full flash command (kernel is enough) to charge, there is a dedicated thread here on tmo.
Do you have also the eMMC image? Then at least worth atry is full flash eMMC and firmware wiping all.
Code:
flasher -i
Code:
flasher -F img.bin --enable-rd-mode --set-rd-flags=no-lifeguard-reset
Code:
flasher -f -F img.bin --erase-user-data=secure
Code:
flasher -f -F img.bin -F emmc.bin --flash-only-mmc
Code:
flasher -F img.bin --disable-rd-mode
Code:
flasher -F img.bin --reboot
The battery seems to be okay and kernel reflashing didn't help.
The screen keeps being turned out.
Last edited by dattelfisch; 2019-06-06 at 16:21. Reason: error
| The Following 3 Users Say Thank You to dattelfisch For This Useful Post: | ||
|
|
2019-06-06
, 16:21
|
|
Posts: 862 |
Thanked: 2,511 times |
Joined on Feb 2012
@ Germany
|
#6
|
Have you tried to boot the rescue image with the flasher?
Does it stay on or does it reboot or switch off too?
Maybe with the rescue image you could look in some log files or check the data structure. Or install manually a package which gives you more log file output.
Does it stay on or does it reboot or switch off too?
Maybe with the rescue image you could look in some log files or check the data structure. Or install manually a package which gives you more log file output.
__________________
N900: gpxsee, fahrplan, gpscon, genwall, qrcode, hextool, libjansson4, libevent-2.0-5, cnee, psi-plus, mihphoto, shc
Maemo flasher/rescue live image.
Fremantle Harmattan SDK VM
N900: gpxsee, fahrplan, gpscon, genwall, qrcode, hextool, libjansson4, libevent-2.0-5, cnee, psi-plus, mihphoto, shc
Maemo flasher/rescue live image.
Fremantle Harmattan SDK VM
| The Following 4 Users Say Thank You to Halftux For This Useful Post: | ||
|
|
2019-06-06
, 16:25
|
|
Posts: 13 |
Thanked: 18 times |
Joined on Jun 2019
|
#7
|
Originally Posted by Halftux
Thank you for your answer.
Have you tried to boot the rescue image with the flasher?
Does it stay on or does it reboot or switch off too?
Maybe with the rescue image you could look in some log files or check the data structure. Or install manually a package which gives you more log file output.
Firstly, I tried using Windows 7, but then I switched to the rescue image.
It doesn't reboot. When turning on the phone by power switch the nokia logo pops up in white screen, then the display turns black and after a while completely out.
Do you know which files could be useful? I'm able to look into the rootfs, that's no problem at all.
PS:
Maybe it could be useful to know which device I'm using.
It's "RM-680, hardware revision 0322" and it's a black 64GB device.
I found this thread where someone seems to have a similar problem:
https://talk.maemo.org/showthread.php?t=90868
But It's not very helpful.
Last edited by dattelfisch; 2019-06-06 at 17:00. Reason: error
| The Following 2 Users Say Thank You to dattelfisch For This Useful Post: | ||
 |
|
2019-06-06
, 16:50
|
|
Posts: 276 |
Thanked: 224 times |
Joined on Dec 2009
@ Frankfurt, Germany
|
#8
|
unfortunately i never owned a n950, as it was the device i ever wanted. try df -h, lsusb or dmesg and check the partitions, clear the tmp-dirs and lock-files. put watchdogs on default, cold-flash the newest image. just suggestions...
__________________
MOD-Package: http://talk.maemo.org/showthread.php?t=42415
MOD-Package: http://talk.maemo.org/showthread.php?t=42415
| The Following 3 Users Say Thank You to mankir For This Useful Post: | ||
|
|
2019-06-06
, 17:30
|
|
Posts: 13 |
Thanked: 18 times |
Joined on Jun 2019
|
#9
|
Originally Posted by mankir
df -h, lsusb, or dmesg can't be used.
unfortunately i never owned a n950, as it was the device i ever wanted. try df -h, lsusb or dmesg and check the partitions, clear the tmp-dirs and lock-files. put watchdogs on default, cold-flash the newest image. just suggestions...
After flashing ubiboot using:
Code:
flasher -k zImage_2.6.32.54-ubiboot-02_301013 -l -b
Code:
telnet IP
The tmp- and lock-dirs are already empty.
Watchdogs set to default by using:
Code:
flasher -F img.bin --clear-rd--flags:no-lifeguard-reset,no-omap-wd,no-ext-wd
Code:
flasher -c -F img.bin -F emmc.bin
"ERROR: You have to supply 2nd image for RM-680:0322
ERROR: Cold flashing failed"
PS:
I've tried the newest ubiboot ("zImage_2.6.32.54-ubiboot-02_23032018"), too but it doesn't make any difference.
Maybe the N950 can't be accessed via serial console over USB?
Last edited by dattelfisch; 2019-06-06 at 18:01.
| The Following 2 Users Say Thank You to dattelfisch For This Useful Post: | ||
|
|
2019-06-06
, 19:38
|
|
Posts: 862 |
Thanked: 2,511 times |
Joined on Feb 2012
@ Germany
|
#10
|
Originally Posted by dattelfisch
/var/log/syslog
Do you know which files could be useful? I'm able to look into the rootfs, that's no problem at all.
could be useful. It is a logfile from the standard installed simple-syslog-daemon.
Better would be to install klogd and sysklogd from developer mode. Maybe klogd is enough and would be easier(no need to remove simple-syslog-daemon).
But as you can't install on the mounted partition, they need to be extracted and I don't know if something like this is possible because of this aegis thing. Which also stopped me to work more with harmattan.
Edit: Maybe open-mode kernel could be of help.
__________________
N900: gpxsee, fahrplan, gpscon, genwall, qrcode, hextool, libjansson4, libevent-2.0-5, cnee, psi-plus, mihphoto, shc
Maemo flasher/rescue live image.
Fremantle Harmattan SDK VM
N900: gpxsee, fahrplan, gpscon, genwall, qrcode, hextool, libjansson4, libevent-2.0-5, cnee, psi-plus, mihphoto, shc
Maemo flasher/rescue live image.
Fremantle Harmattan SDK VM
Last edited by Halftux; 2019-06-06 at 19:45.
| The Following 3 Users Say Thank You to Halftux For This Useful Post: | ||
Unfortunetely my N950 doesn't boot up. I tried reflashing with every available firmware.
The current firmware is: "DFL_61_HARMATTAN_40.2012.21-3_PR_RM680".
I'm also able to reflash the kernel and mount rootfs. No existing /var/malf (therefore not the MALF-problem)
But nothing helps!
Current state:
After plugging in the battery the device starts up showing the NOKIA-Logo but then the screen turns black and after while the display turns out (but the device is still running).
Maybe there is an expert who can help me with this.
Please.
Last edited by dattelfisch; 2019-06-06 at 01:47.