Thread: [HOWTO] Comprehensive Firmware Flashing Guide for N9
View Single Post
itsnotabigtruck is offline itsnotabigtruck
2012-03-04 , 02:45
Posts: 245 | Thanked: 915 times | Joined on Feb 2012
#39
Originally Posted by patocr View Post
i did..... sudo -i, then pass...... then flasher -f -F image.bin -R
connect phone being OFF, nothing
power on while connected.
i hear a "TICK" and a menu shows up saying "not enough power in usb to charge"... then... "enter usb charge mode"........
i really, really, really, really, dont get it.

i used to flash my 5230 several times, i cannot make this to read up my device, neither i use win or mac.

i am frustrated as ive been 4 hours trying. im done.
Don't give up! You're almost there, you just need to charge up your N9 further before it will let you flash. Make sure to use the charger that came with the N9 to ensure that it gets enough power (not every wall charger or USB port will do).

Once it's charged past 50% or so, power it back off and get ready to flash.

Originally Posted by m.h.e.r View Post
My N9 has PR 1.1.1 (22.2011.44-2.335.4_PR_335)
can i flash with any verson of PR 1.2 ?
if yes, which one is the best choice?
You usually can't go wrong with 001 - but if you want to stick with the firmware intended for the Middle East use 006 instead.
__________________
Last edited by itsnotabigtruck; 2012-03-04 at 02:49.