Poll: Have you successfully installed Nitdroid by now?
Poll Options
Have you successfully installed Nitdroid by now?

Reply
Thread Tools Search this Thread
Posts: 101 | Thanked: 46 times | Joined on Aug 2010 @ somerset
#4651
Originally Posted by Firminator View Post
ok, but the battery level doesnt seem to be moving
you should notice that after a short while maybe 10-15 minutes it will show full battery then you can disconnect from power supply.
 
Posts: 23 | Thanked: 15 times | Joined on Dec 2011
#4652
20 min, 8% charge. Hmm. I'll leave it for the night see how things go.
 
Posts: 112 | Thanked: 77 times | Joined on Aug 2011 @ Jakarta, Indonesia
#4653
Originally Posted by Firminator View Post
20 min, 8% charge. Hmm. I'll leave it for the night see how things go.
Solution:
Boot NITDroid > Power off (without switching to Maemo) > Charge until 100% > Unplug charger > Boot NITDroid again
__________________
Follow my Twitter account to keep up to date about technology news!
@AWasisto
 
Posts: 199 | Thanked: 12 times | Joined on Dec 2009 @ São Paulo - Brasil
#4654
Originally Posted by AWasisto View Post
Solution:
Boot NITDroid > Power off (without switching to Maemo) > Charge until 100% > Unplug charger > Boot NITDroid again
My USB port is broken...and I"ve been having the same problem.
 
Posts: 101 | Thanked: 46 times | Joined on Aug 2010 @ somerset
#4655
Originally Posted by rmarcus View Post
My USB port is broken...and I"ve been having the same problem.
sorry but i believe until bme is sorted you may be out of luck.
my last n900's usb port came off so had to use eternal charger and was unable to use nitdroid properly.
although there may be a fix i am unaware of.

please correct me if i'm wrong
 
Posts: 23 | Thanked: 15 times | Joined on Dec 2011
#4656
So what's the theory behind this issue ?

I usually charge the battery directly through a nokia battery charger (I carry 3 spare batteries)
 
Posts: 101 | Thanked: 46 times | Joined on Aug 2010 @ somerset
#4657
i think nitdroid needs to register some charge going to the battery for battery level to be detected so charging needs to be done on device with nitdroid running.
other members of this forum can probably give a more detailed answer than mine and may even correct me but i believe this is the basic reason.
 
Posts: 23 | Thanked: 15 times | Joined on Dec 2011
#4658
So it should continue to work fine even if I talk the battery out and swap a different one in ?

========

Edit : Works fine with a different battery .

Maybe this solution should be added to the F.A.Q for Nitdroid.

Last edited by Firminator; 06-23-2012 at 08:48 AM.
 
Posts: 76 | Thanked: 8 times | Joined on Jun 2011
#4659
some one help me fix n900 flashing problem .

cmt-programming failed and no serial number on my mobile
 
Posts: 112 | Thanked: 77 times | Joined on Aug 2011 @ Jakarta, Indonesia
#4660
Originally Posted by scoobydoo View Post
sorry but i believe until bme is sorted you may be out of luck.
my last n900's usb port came off so had to use eternal charger and was unable to use nitdroid properly.
although there may be a fix i am unaware of.

please correct me if i'm wrong
I think so...

Originally Posted by Firminator View Post
So it should continue to work fine even if I talk the battery out and swap a different one in ?

========

Edit : Works fine with a different battery .

Maybe this solution should be added to the F.A.Q for Nitdroid.
If you swap an empty battery with the charged one, it will be shown as empty on NITDroid.

Originally Posted by zozeta2 View Post
some one help me fix n900 flashing problem .

cmt-programming failed and no serial number on my mobile
Try --cmt-no-verify parameter.
__________________
Follow my Twitter account to keep up to date about technology news!
@AWasisto

Last edited by AWasisto; 06-23-2012 at 01:07 PM.
 

The Following User Says Thank You to AWasisto For This Useful Post:
Reply

Tags
community win, mor*nicindians, nitdroid

Thread Tools Search this Thread
Search this Thread:

Advanced Search

 
Forum Jump


All times are GMT -4. The time now is 04:03 AM.